Definitions for moldboards

• Definition
• Anagrams (495)

moldboards mold·board

Spelling: [mohld-bawrd, -bohrd]

IPA: /ˈmoʊldˌbɔrd, -ˌboʊrd/

Moldboards is a 10 letter English word. It's valid Words with friends word worth 18 points.

You can make 495 anagrams from letters in moldboards (abddlmoors).

Definitions for moldboards

noun

1. the curved metal plate in a plow that turns over the earth from the furrow.
2. a large blade mounted on the front of a bulldozer to push loose earth.
3. a board forming one side or surface of a mold for concrete.
4. the curved metal plate in a plow that turns over the earth from the furrow.
5. a large blade mounted on the front of a bulldozer to push loose earth.
6. a board forming one side or surface of a mold for concrete.

Origin of moldboards

1300-50; replacing earlier moldbred, Middle English mold bred. See mold³ (for defs 1, 2), mold¹ (for def 3), Examples for moldboards

This shows that the soil is slipping off the moldboard easily.

The moldboard was rough and the curves of no two were alike.

The moldboard of this plow is made of wood and covered with thick pieces of iron.

The disks, set at an angle, cast less furrow than a moldboard plow.

The end of the beam is fastened to a brace which extends to the back of the moldboard.

The model has a share, standard, and moldboard of metal with a gauge wheel on the beam.

The share and point are in one piece; and the moldboard is one piece.

Its moldboard was based on a design worked out by Thomas Jefferson.

The long fingers of the moldboard helped break the sod further.

This sod-turning plow has its landside, moldboard, and colter in separate pieces.

This sod-turning plow has its landside, moldboard, and colter in separate pieces.

The end of the beam is fastened to a brace which extends to the back of the moldboard.

The disks, set at an angle, cast less furrow than a moldboard plow.

The moldboard was rough and the curves of no two were alike.

The moldboard of this plow is made of wood and covered with thick pieces of iron.

This shows that the soil is slipping off the moldboard easily.

The model has a share, standard, and moldboard of metal with a gauge wheel on the beam.

The long fingers of the moldboard helped break the sod further.

Its moldboard was based on a design worked out by Thomas Jefferson.

The share and point are in one piece; and the moldboard is one piece.